#include "config.h"

/****************************************************
函数名：Pluse_InPut_IO_Configuration
功能  ：Pluse_InPut部分用到的IO初始化
参数  ：无
返回值：无
****************************************************/
void Pluse_InPut_IO_Configuration(void)
{
	GPIO_InitTypeDef GPIO_InitStructure;	//定义GOIP配置结构体
	
	RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA | RCC_AHB1Periph_GPIOD| RCC_AHB1Periph_GPIOE | RCC_AHB1Periph_GPIOG, ENABLE);
	
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13; 
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
	GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_DOWN;
  GPIO_Init(GPIOE, &GPIO_InitStructure);
	
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7; 
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
	GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_UP;
  GPIO_Init(GPIOG, &GPIO_InitStructure);
	
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_14 | GPIO_Pin_15; 
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
	GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_UP;
  GPIO_Init(GPIOD, &GPIO_InitStructure);
	
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1  | GPIO_Pin_2; 
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
	GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_DOWN;
  GPIO_Init(GPIOA, &GPIO_InitStructure);
	
	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; 
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
	GPIO_InitStructure.GPIO_PuPd  = GPIO_PuPd_UP;
  GPIO_Init(GPIOA, &GPIO_InitStructure);
	
	GPIO_ResetBits(GPIOA,GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2);
	GPIO_SetBits(GPIOD,GPIO_Pin_14 | GPIO_Pin_15);
	GPIO_SetBits(GPIOE,GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13);
	GPIO_ResetBits(GPIOE,GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7);
	GPIO_SetBits(GPIOG,GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7);
	GPIO_SetBits(GPIOA,GPIO_Pin_10);
	if(Key1 == 1)
	{
	  TXHData.BoardType = 1; //新主板，带屏幕的
	  }
	else
		TXHData.BoardType = 0; 
	
}
/****************************************************
函数名：Pluse_InPut_EXTI_Configuration
功能  ：中断配置(掉电检测)
参数  ：无
返回值：无
****************************************************/
void Pluse_InPut_EXTI_Configuration(void)
{
	EXTI_InitTypeDef EXTI_InitStructure;	//定义中断配置结构体
	
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);//使能 SYSCFG 时钟
	SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOE, EXTI_PinSource0);
	SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOE, EXTI_PinSource1);
	SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOE, EXTI_PinSource8);
	SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOE, EXTI_PinSource9);
	
		/* 配置 EXTI_Line0 */
	EXTI_InitStructure.EXTI_Line = EXTI_Line0;//LINE0
	EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;//中断事件
	EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; //下降沿触发
	EXTI_InitStructure.EXTI_LineCmd = ENABLE;//使能 LINE10
	EXTI_Init(&EXTI_InitStructure);//
		/* 配置 EXTI_Line1 */
	EXTI_InitStructure.EXTI_Line = EXTI_Line1;//LINE1
	EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;//中断事件
	EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising_Falling; //下降沿触发
	EXTI_InitStructure.EXTI_LineCmd = ENABLE;//使能 LINE10
	EXTI_Init(&EXTI_InitStructure);//

}
void Pluse_InPut_NVIC_Configuration(void)
{
	NVIC_InitTypeDef NVIC_InitStructure;

//	NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQn;//外部中断 11
//	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x03;//抢占优先级 0
//	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x01;//响应优先级 2
//	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;//使能外部中断通道
//	NVIC_Init(&NVIC_InitStructure);//配置 NVIC
	
	/***************************断电检测****************************/
	NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;//外部中断 0
	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x03;//抢占优先级 0
	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x01;//响应优先级 2
	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;//使能外部中断通道
	NVIC_Init(&NVIC_InitStructure);//配置 NVIC
	NVIC_InitStructure.NVIC_IRQChannel = EXTI1_IRQn;//外部中断 1
	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x03;//抢占优先级 0
	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x01;//响应优先级 2
	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;//使能外部中断通道
	NVIC_Init(&NVIC_InitStructure);//配置 NVIC
	
}
void Pluse_InPut_Init(void)
{
  Pluse_InPut_IO_Configuration();
	delay_ms(100);
	Pluse_InPut_EXTI_Configuration();
	Pluse_InPut_NVIC_Configuration();
  if(POS_Wireless == SWF_ON)
	{
		if(POS_URL == SWF_ON)
			TXHData.POS_Info.ConnectType = POS_Connect_Typ_Cloud_Tast;
		else
			TXHData.POS_Info.ConnectType = POS_Connect_Typ_Cloud;
		
		TXHData.POS_Info.NetType = ~((POS_NetTypeH << 1) | POS_NetTypeL);
		TXHData.POS_Info.NetType &= 0x03;
	  }
	else
	{
	  TXHData.POS_Info.ConnectType = POS_Connect_Typ_Station;
	  }
	if(POS_Monitor == SWF_ON)
		TXHData.POS_MonitorModel = 1;
	else
		TXHData.POS_MonitorModel = 0;
	TXHData.HardwareVersion = ((HV4 << 4) | (HV3 << 3) | (HV2 << 2) | (HV1 << 1) | HV0) + 24;//最高位1表示小板。0表示标准版
	
}
void Pluse_InPut_IRQHandler(void)
{
	u8 i = 0;
	/****************拉断开关1***************/
	if(EXTI_GetITStatus(EXTI_Line8) != RESET)
	{
		
		EXTI_ClearITPendingBit(EXTI_Line8);
   }
	/****************拉断开关2***************/
	if(EXTI_GetITStatus(EXTI_Line9) != RESET)
	{

		EXTI_ClearITPendingBit(EXTI_Line9);
   }
	/****************掉电检测***************/
	if(EXTI_GetITStatus(EXTI_Line0) != RESET)
	{
		TXHData.PowerDown.Flag.Power10V = 1 - PowerLow10V;
		EXTI_ClearITPendingBit(EXTI_Line10);
   }
	if(EXTI_GetITStatus(EXTI_Line1) != RESET)
	{
		TXHData.PowerDown.Flag.Power7V = 1 - PowerLow7V;
		EXTI_ClearITPendingBit(EXTI_Line10);
   }
}