基础版本
This commit is contained in:
bathfire
@@ -0,0 +1,142 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file ADC_Interleaved_DMAmode2/stm32f4xx_conf.h
|
||||
* @author MCD Application Team
|
||||
* @version V1.0.0
|
||||
* @date 19-September-2011
|
||||
* @brief Library configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
||||
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
||||
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
||||
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
||||
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_CONF_H
|
||||
#define __STM32F4xx_CONF_H
|
||||
|
||||
#if defined (HSE_VALUE)
|
||||
/* Redefine the HSE value; it's equal to 8 MHz on the STM32F4-DISCOVERY Kit */
|
||||
#undef HSE_VALUE
|
||||
#define HSE_VALUE ((uint32_t)8000000)
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Uncomment the line below to enable peripheral header file inclusion */
|
||||
#include "stm32f4xx.h"
|
||||
#include "stm32f4xx_it.h"
|
||||
#include "stm32f4xx_adc.h"
|
||||
#include "stm32f4xx_can.h"
|
||||
#include "stm32f4xx_crc.h"
|
||||
#include "stm32f4xx_cryp.h"
|
||||
#include "stm32f4xx_dac.h"
|
||||
#include "stm32f4xx_dbgmcu.h"
|
||||
#include "stm32f4xx_dcmi.h"
|
||||
#include "stm32f4xx_dma.h"
|
||||
#include "stm32f4xx_exti.h"
|
||||
#include "stm32f4xx_flash.h"
|
||||
#include "stm32f4xx_fsmc.h"
|
||||
#include "stm32f4xx_hash.h"
|
||||
#include "stm32f4xx_gpio.h"
|
||||
#include "stm32f4xx_i2c.h"
|
||||
#include "stm32f4xx_iwdg.h"
|
||||
#include "stm32f4xx_pwr.h"
|
||||
#include "stm32f4xx_rcc.h"
|
||||
#include "stm32f4xx_rng.h"
|
||||
#include "stm32f4xx_rtc.h"
|
||||
#include "stm32f4xx_sdio.h"
|
||||
#include "stm32f4xx_spi.h"
|
||||
#include "stm32f4xx_syscfg.h"
|
||||
#include "stm32f4xx_tim.h"
|
||||
#include "stm32f4xx_usart.h"
|
||||
#include "stm32f4xx_wwdg.h"
|
||||
#include "misc.h"
|
||||
|
||||
|
||||
#define BITBAND(addr, bitnum) ((addr & 0xF0000000)+0x2000000+((addr&0xFFFFF)<<5)+(bitnum<<2))
|
||||
#define MEM_ADDR(addr) *((volatile unsigned long *)(addr))
|
||||
#define BIT_ADDR(addr, bitnum) MEM_ADDR(BITBAND(addr, bitnum))
|
||||
|
||||
#define GPIOA_ODR_Addr (GPIOA_BASE+20) //0x40020014
|
||||
#define GPIOB_ODR_Addr (GPIOB_BASE+20) //0x40020414
|
||||
#define GPIOC_ODR_Addr (GPIOC_BASE+20) //0x40020814
|
||||
#define GPIOD_ODR_Addr (GPIOD_BASE+20) //0x40020C14
|
||||
#define GPIOE_ODR_Addr (GPIOE_BASE+20) //0x40021014
|
||||
#define GPIOF_ODR_Addr (GPIOF_BASE+20) //0x40021414
|
||||
#define GPIOG_ODR_Addr (GPIOG_BASE+20) //0x40021814
|
||||
#define GPIOH_ODR_Addr (GPIOH_BASE+20) //0x40021C14
|
||||
#define GPIOI_ODR_Addr (GPIOI_BASE+20) //0x40022014
|
||||
|
||||
#define GPIOA_IDR_Addr (GPIOA_BASE+16) //0x40020010
|
||||
#define GPIOB_IDR_Addr (GPIOB_BASE+16) //0x40020410
|
||||
#define GPIOC_IDR_Addr (GPIOC_BASE+16) //0x40020810
|
||||
#define GPIOD_IDR_Addr (GPIOD_BASE+16) //0x40020C10
|
||||
#define GPIOE_IDR_Addr (GPIOE_BASE+16) //0x40021010
|
||||
#define GPIOF_IDR_Addr (GPIOF_BASE+16) //0x40021410
|
||||
#define GPIOG_IDR_Addr (GPIOG_BASE+16) //0x40021810
|
||||
#define GPIOH_IDR_Addr (GPIOF_BASE+16) //0x40021C10
|
||||
#define GPIOI_IDR_Addr (GPIOG_BASE+16) //0x40022010 //F4XXIO 口操作 , 只对单一的 IO 口 ,n 的值范围 [0-15]
|
||||
|
||||
#define GPIOAout(n) BIT_ADDR(GPIOA_ODR_Addr,n) //GPIOA 某一位输出
|
||||
#define GPIOAin(n) BIT_ADDR(GPIOA_IDR_Addr,n) //GPIOA 某一位输入
|
||||
#define GPIOBout(n) BIT_ADDR(GPIOB_ODR_Addr,n) //GPIOB 某一位输出
|
||||
#define GPIOBin(n) BIT_ADDR(GPIOB_IDR_Addr,n) //GPIOB 某一位输入
|
||||
#define GPIOCout(n) BIT_ADDR(GPIOC_ODR_Addr,n) //GPIOC 某一位输出
|
||||
#define GPIOCin(n) BIT_ADDR(GPIOC_IDR_Addr,n) //GPIOC 某一位输入
|
||||
#define GPIODout(n) BIT_ADDR(GPIOD_ODR_Addr,n) //GPIOD 某一位输出
|
||||
#define GPIODin(n) BIT_ADDR(GPIOD_IDR_Addr,n) //GPIOD 某一位输入
|
||||
#define GPIOEout(n) BIT_ADDR(GPIOE_ODR_Addr,n) //GPIOE 某一位输出
|
||||
#define GPIOEin(n) BIT_ADDR(GPIOE_IDR_Addr,n) //GPIOE 某一位输入
|
||||
#define GPIOFout(n) BIT_ADDR(GPIOF_ODR_Addr,n) //GPIOF 某一位输出
|
||||
#define GPIOFin(n) BIT_ADDR(GPIOF_IDR_Addr,n) //GPIOF 某一位输入
|
||||
#define GPIOGout(n) BIT_ADDR(GPIOG_ODR_Addr,n) //GPIOG 某一位输出
|
||||
#define GPIOGin(n) BIT_ADDR(GPIOG_IDR_Addr,n) //GPIOG 某一位输入
|
||||
#define GPIOHout(n) BIT_ADDR(GPIOH_ODR_Addr,n) //GPIOH 某一位输出
|
||||
#define GPIOHin(n) BIT_ADDR(GPIOH_IDR_Addr,n) //GPIOH 某一位输入
|
||||
#define GPIOIout(n) BIT_ADDR(GPIOI_ODR_Addr,n) //GPIOI 某一位输出
|
||||
#define GPIOIin(n) BIT_ADDR(GPIOI_IDR_Addr,n) //GPIOI 某一位输入
|
||||
|
||||
/* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* If an external clock source is used, then the value of the following define
|
||||
should be set to the value of the external clock source, else, if no external
|
||||
clock is used, keep this define commented */
|
||||
/*#define I2S_EXTERNAL_CLOCK_VAL 12288000 */ /* Value of the external clock in Hz */
|
||||
|
||||
|
||||
/* Uncomment the line below to expanse the "assert_param" macro in the
|
||||
Standard Peripheral Library drivers code */
|
||||
/* #define USE_FULL_ASSERT 1 */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr: If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#endif /* __STM32F4xx_CONF_H */
|
||||
|
||||
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user